Retaining Wall Products
  Eding Products
  Paving / Patio Products
  Questions?
Contact us at 1-888-601-2326
e-mail: retailsupport@keystonewalls.com

©Keystone Retaining Wall Systems, Inc.

www.keystonewalls.com | CONTACT US | ABOUT US | HOME

 ContechLogo
     
  LClogo Basic Installation  
 
dig   tamp   GWlevel
Mark & Dig • Mark an outline of your project. Then dig a shallow trench 6 inches deep by 12 inches wide.   Base & Tamp • Add 4 inches of granular base material. Compact base to avoid settling.   Level • When burying the first course of units, it is very important to level them from front-to-back and side-to-side.
 
       
 
GWstack   level   stack
Stack • Place the next course of units centered over the two units below and continue until your wall is complete. Make sure your wall is not taller than 24 inches.   Cap • Finish the wall with a cap unit to give it a polished look. Secure in place with concrete adhesive.   Optional Lip Removal • To remove outside lugs or edges of retaining lip, hold unit securely or place at angle on ground. Strike the lug firmly with a hammer. Always wear safety glasses to protect eyes from chips.