| Mark & Dig • Mark an outline of your project. Then dig a shallow trench 3” deep by 6” wide to receive the edging unit. |
|
Place & Level • Place units in the trench, over landscape fabric, in either a straight line or a curved alignment. Interlock the overlap edge detail of the A & B units in an alternating manner to connect the system to its final geometry. |
|
Adjust & Finish • Adjust unit alignment by hand or by using a rubber mallet to tap the units in place. Finalize your installation by placing landscape rock, mulch, sod, or other similar materials to achieve your final design appearance. |
